top of page
Thinkware F790
Thinkware

F790

Front 1080 Footage

Motion Detection

32GB Card Supplied

The F790 dash cam from Thinkware uses the CMOS Imaging sensor to allow the dash cam to record clean & crisp 1080p Full HD footage, even at nighttime via its Super Night Vision 3.0 technology. The F790 features an integrated mount and power supply, making the removal of the camera quick and simple. Full of extra features such as Advanced Parking mode with Energy Saving 2.0 and Time Lapse technology, to keep you protected longer, and built-in GPS giving you access to multiple helpful aspects such as the speed camera database.

  • CAMERA: CMOS 2.1M RESOLUTION

  • Front: Full HD 1080P (1920 X 1080)

  • VIEWING ANGLE Front: 140° (Diagonal)

  • CAPACITY: Micro SD Card 16GB/32GB/64GB/128GB

  • 32GB Card supplied in box

  • UHS-I SENSOR: 3-Axis

  • Accelerometer G-Sensor (3D, ±3G)

  • GPS: Built-in GPS WI-FI:

  • Built-in Wi-Fi (2.4GHz / 5GHz)

  • POWER: DC 12/24V Built-in Super Capacitor

Parking Surveillance Mode


Parking mode is a feature of dash cams that are either hardwired or using the OBD2 Connector. This allows them to continue recording while your car is parked and turned off. All Thinkware dashcams continuously monitor the health of the vehicle’s battery and will shut down if it detects any issues. Please note: A hardwire or OBDII cable installation is required for Parking Mode functionality


Motion Detection


Monitor and capture any motion around the vehicle for potential vandalism attempts.


Impact Detection


Monitor any impact to the vehicle while it is parked to catch any hit-and-run driver in the act while you are away.


Time Lapse Parking Mode


Catch any potential bumps, scrapes and other incidents by recording footage from your vehicle when you are not nearby. Timelapse mode records at 2 frame per second (FPS) to reduce the size of the video file. This allows the dash cam to record longer than other dash cams whilst in parking mode.


Thinkware Dash Cam Link App


The camera’s built-in Wi-Fi allows it to connect to the Dash Cam Link App, letting you easily view, download, delete or share footage directly from your smartphone. Thinkware Dash Cam Link provides easy access to your Thinkware Dash Cam. Share the best driving videos on social media by simply downloading your dashcam footage into your smartphone’s photo album. Replay your latest driving videos and manage your dash cam’s settings all in one app.


High Definition Video Quality


CMOS Image Sensors allow crisp clean Full 1080p HD footage recording during both day and night at 30FPS. Capture more detail in all road conditions including number plates of other drivers.   The 140° wide angle lens view will minimize blind spots to assure recording of all events without fail.   Add a rear camera to capture Full HD 1080p footage with a 160° wide-angle lens.


Multiple Recording Modes


Please ensure that your F790 Dash Cam firmware is up-to-date via the smartphone app to fully benefit from these modes.


CONTINUOUS RECORDING MODE 


This mode is activated automatically when you start the engine. Recorded videos are saved in one-minute segments with an auto-looping mechanism.


INCIDENT RECORDING MODE 


The Active Impact Monitoring System will automatically store the video data ten seconds prior to and after a collision registered by the 3-axis G-Sensor.


MANUAL RECORDING MODE 


Similar to a video camera, you can use the Manual Recording Mode to capture events that occur in front of your vehicle whether or not it is in motion.


FAIL-SAFE RECORDING 


In the event that the power gets disconnected after an accident, the fail-safe recording uses the Super Capacitor for backup power to ensure safe storage of any recording in progress.

bottom of page